TSDP is located in the Coventry Park Office Complex just off of 53rd St and Utica
Ridge Road
Get Detailed Directions
5129 Utica Ridge Road Davenport IA 52807
Ph: (563) 359-6060 info@tsdp.com
|
Wireless Broadband Point to Point has recently come of age with a new generation
of reliable and extremely robust equipment.
- High Speed - 100Mbps to 1Gbps. 1Gbps speeds are achievable inside of two miles with
a clear Line-of-Sight. 100-300Mbps speeds are possible depending on the distance
and topography.
- Distances - 100-300Mbps are possible at distances up to 80 miles depending
upon obstructions and topography. Longer distances can be achieved by relaying multiple
Point to Point connections together. 1Gbps speeds can reach farther than 2 miles
utilizing the same relay method as well. Click here for an example
diagram.
- Security - The Wireless Broadband Equipment discussed here meets or exceeds HIPPA
requirements.
- Reliability - These are highly reliable connections utilizing “Carrier Class”
equipment capable of 99.999% reliability.
- Cost Effective - Costs may vary depending
upon what your business desires from us in the way of services, however typical
costs will be from $35,000 to $40,000 for a complete installation connecting two buildings.* There is no recurring monthly cost, as you own the equipment and the
equipment provides the bandwidth.
- Service Contracts - You can opt to purchase service contracts with this type of
equipment.
- Speed of Deployment - Typically we can deploy this equipment in a matter of weeks.
*This cost is relatively equal for 1Gbps speeds inside of two miles or 100-300Mbps at much greater distances. Again, 1Gpbs speeds are only possible inside of two miles with a clear Line-of-Sight. The prices mentioned include: site surveys, path analysis, equipment, installation, antenna mounting and alignment, and training. As the equipment itself provides the bandwidth, THERE IS NO RECURRING MONTHLY COST. Additional costs can be incurred if a direct PtP connection between two points cannot occur, and we have to establish a relay. A relay will involve an accessible midpoint tower or taller building to beam the signal to. This would involve using double the amount of equipment which in turn doubles the cost, with the potential of a charge for the use of the relay location (see Diagram 2). There is NO cost for the bandwidth itself. You gain the Point to Point bandwidth with the purchase of the equipment
|